PNI MAB600 swing gate automation kit

PNI MAB600 swing gate automation kit with 2 motors, lamp, photocells, remote controls, and control panel, gate length 2 x 3 m max, gate weight max. 600 kg, with travel limiter.

PNI MAB500S Swing Port Automation Kits

PNI MAB500S swing gate automation kit with 2 motors, remote controls and control panel, max. gate weight 500 Kg, with stroke limiter

PNI MAB350S swing gate automation kit with articulated arm, sheet weight max 300Kg and max length 2.5m

PNI MAB350S swing gate automation kit with articulated arm, sheet weight max 300Kg and max length 2.5m
£312.82
Availability: In stock
SKU
PNI-MAB350-S
Write Your Own Review
You're reviewing:PNI MAB350S swing gate automation kit with articulated arm, sheet weight max 300Kg and max length 2.5m
Your Rating
Product Identification
Product code PNI-MAB350-S
Features
Power 12V
Motor voltage 12V DC
Engine power 40W x 2
Rotational speed 300 rpm
Maximum opening angle of the gate 110°
Maximum weight supported 300 kg
Maximum Length of Gate Sheet 2.5 m
RF Communication Frequency 433 MHz
Water protection class IP55
Working temperature -26°C ~ +80°C
Functions
Slow Power On/Off Yes
Automatic shut-off timer Yes
Engine steering identification (closing/opening) Yes
Yala unlock time setting Yes
High-speed drive Yes
The package contains
Extendable arm motor Yes, 2 pieces
Control box with fixing screws Yes
Remote Control Yes, 2 pieces
Rubber stop
Rubber stop fixing screw
Manual unlock key Yes, 2 pieces
Fixed support for pole and gate Yes, 6 pieces
Swivel pole support Yes, 2 pieces
Screws, nuts, washers
Nut screw and washers
Clevis type pin
Nail clip
Swivel gate bracket
Socket wrench (for stroke limiter adjustment) Yes