PNI IP840 PTZ wireless video surveillance camera package, 8MP 4K with photovoltaic solar panel, 60W power with 20A battery, 12V output

Rechargeable battery and solar panel

The PNI photovoltaic solar panel PSF6020 power 60W with 20A battery can be installed in any location, even in isolated places where a stable power source is lacking. The built-in 20 Amp battery ensures the operation of a surveillance camera* for up to 60 hours.

The monocrystalline solar panel with a maximum power of 60W charges the battery quickly. The battery charge level is indicated by the central LED on the metal mounting bracket. When the battery is charged below 25%, the LED turns red and flashes. When the battery is fully charged, the LED turns green and stays constantly on. The solar panel should be installed in an area that provides the best possible exposure to the sun, facing S or SW.

* Surveillance camera is not included

Versatile  pole or wall mounting

The solar panel is equipped with a versatile and multifunctional fixing bracket with accessories for fixing to the wall or for fixing to a pole at height.

The support for the surveillance camera is also multifunctional, having several types of attachment for as many models of surveillance cameras as possible.

Adjustable angle and direction

For optimal operation and for the most efficient capture of solar radiation, it is necessary to correctly adjust the angle of the panel and direction according to the cardinal points.

General description

The PNI IP840 is a high-performance surveillance camera designed for both indoor and outdoor use. The device is equipped with a 1/2.7" CMOS sensor and a resolution of 8 MP (4K), transmits the main stream at 3840 × 2160 @12 fps and supports microSD up to 256 GB. The housing benefits from IP65 protection, which makes it weatherproof.

Installation and connectivity

For installation, the device must be powered by a 12 V / 1 A adapter, and the microSD card slot is located under a watertight protective cover, which must be closed tightly to ensure moisture resistance. Connecting to the network can be done via WiFi (2.4 GHz) or RJ45 cable, and the dedicated app allows you to add the camera by scanning a QR code or add it manually.

Software and monitoring functionalities

The system supports H.265X video compression (H.264+/H.264 compatible), two-way communication (integrated microphone and speaker) and dual illumination (infrared LED + white LED). Features include motion detection, human detection, and motion tracking; The user can configure the sensitivity, recording mode (motion detection or continuous 24h) and alarm notifications.

Advanced settings and maintenance

In the preview interface, you can adjust the lighting mode (IR only, white only, or both), rotate the camera. Note: Motion detection and motion tracking cannot be enabled simultaneously.