Voltage stabilizer with PNI relay AVR M800VA, 2.2A, 480W, 800VA

No voltage fluctuations

The PNI AVR M800VA 480W relay voltage stabilizer is designed to keep the output voltage as stable as possible. When the voltage from the mains fluctuates, the PNI AVR M800VA will automatically adjust the voltage to the normal value.

Depending on their capacity, PNI stabilizers have a wide range of applications: electronic equipment, household appliances, air conditioners, power tools, refrigerators, and, in general, electronics that require stable voltage.

How does it work?

When the unit that measures the input voltage detects a variation outside the preset range, it will send a signal to the control unit. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and control the output voltage within the preset range.

The copper coil is the basic component of the voltage stabilizer. The PNI AVR M800VA 480W relay voltage stabilizer uses high-quality pure copper. This gives the coil a longer service life and greater efficiency.

Maximum load

The maximum load supported by the PNI AVR M800VA voltage stabilizer is 480W 2.2A.

The stabilizer's 480W 2.2A capacity allows you to connect household appliances, including televisions, printers, microwave ovens, fans, and more.

Caution: do not connect consumers with loads that exceed the power of the stabilizer. For example, electronics with motors/compressors can have 2-6 times more power than the declared power when starting up. Choose the stabilizer, taking this into account.

Essential functions

Within the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% output power. Outside this range, the output power should be as shown in the adjacent diagram.

Important functions:

• output delay (time-delay) - 6 or 180 seconds;
• automatic overvoltage and undervoltage protection (180V - 250V);
• overload/overtemperature protection;
• automatic adaptation to input frequency (50/60 Hz).