PIR PNH SafeHouse HS003LR wireless motion sensor for wireless alarm systems

Indoor motion detection

The PNI SafeHouse HS003LR sensor is designed to detect movement in the protected space and transmit an alarm signal to a burglar alarm system. It can only be used indoors, as many false alarms can occur outdoors.

Wireless communication

PNI SafeHouse HS003LR is very easy to use and install because it does not require any cables and is compatible with PNI wireless alarm systems. Among these we mention:

• PNI SafeHouse HS550
• PNI SafeHouse HS600
• PNI SafeHouse HS650
• PNI SafeHome PT700
• PNI SafeHouse HS007LR wireless outdoor siren.

They use wireless communication with signals at a frequency of 433 MHz. The communication distance between the two units can be up to 100 meters without obstacles.

Increased autonomy

The motion sensor is powered by three 1.5V AA (LR6) batteries, which provide up to 1 year of autonomy. However, it is recommended to test the detector's operation every few months.

Installation

You can mount the detector on the wall using double-sided tape or by screwing it onto a fixed support. The recommended height for mounting the detector is 2-2.2 m from the floor.

To pair with a wireless alarm system , press the pairing button on the back of the sensor to send a signal to the central unit.

Attention, all other accessories must be turned OFF when pairing a new component.