Relay with PNI CA500LR remote control for controlling 1 or 2 garage doors, gates, barriers, 2 relays, 12V power supply

Remote control

With a wide range of applications, the PNI CA500LR can control garage doors, access gates, elevators, lifts, electromagnetic gates and much more. The device includes a transmitter (remote control) and a receiver with 2 relays independent of each other.

Operating modes

By positioning the jumper on the motherboard, several operating modes of the two relays can be programmed:

1. manual mode (by pressing the button on the remote control, the corresponding relay will close and open);

2. automatic mode (after releasing the button on the remote control, the corresponding relay returns to its initial state);

3. dual mode (one relay closes and the other relay opens).

Maximum number of remote controls

The PNI CA500LR remote control relay can enroll up to 18 remote controls.

Learning a new remote control involves briefly pressing the learning button. The LED lights up. Press button A on the remote control. The red LED flashes 3 times then remains on to confirm learning button A to control the first relay. The red LED remains on. Press button B on the remote control. The red LED flashes 3 times then goes off to confirm learning. Repeat the procedure to learn additional remote controls.