PNI VHF285 Antenna Package for 134-174MHz taxi and PNI T941 antenna mounting bracket on the trunk

PNI-T941 - PNI T941 antenna mounting bracket on trunk - includes 5m cable

Compatibility
The PNI T941 holder can be used for mounting a PL-type antenna in a fixed position, similar to the one in the image below.
Cable length
	The cable length is 5m, thus allowing you to mount the antenna on the trunk of the vehicle and still get to make the connection with the CB radio station.
Cable
The cable used is of RG58 coaxial type of very good quality with maximum performance in terms of transmission and reception.

	performances The performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.5: 1, maximum applied power 200 W, impedance 50 Ohms, stainless steel, etc.
Communication distance Communication distance is another decisive factor in the acquisition and use of a VHF antenna. Thus, the maximum communication distance is reached in ideal working conditions: calibrated antenna, open field without obstacles and optimal climatic conditions. Any obstacle such as hills, mountains, buildings, walls and station power can significantly reduce the transmission / reception distance.
	Antenna length Antenna length is another very important factor that can influence the communication distance in traffic. Thus, the longer the antenna, the greater the communication distance / range. The PNI VHF285 antenna has a length of 128 cm.
Batch This antenna is ready for mounting on a magnetic base with the type of PL connector or on a fixed support. We recommend the separate purchase of the PNI S120 / PL 125mm magnetic base containing 4m cable and PL250 plug. All you have to do is connect it to a station and calibrate it to use it at maximum performance.

PNI-T941 - PNI T941 antenna mounting bracket on trunk - includes 5m cable
Product identification
Code	PNI-T941
General characteristics
Material	Stainless steel
Support type	Fixed on the body
Station connection plug	PL259
Color	Silver
Compatible antenna	With thread
size	2 mm
The package contains
Antenna mounting bracket	Yes
Cable	5m RG58
PL259 plug	Yes

PNI-VHF285 - PNI VHF285 antenna for taxi 134-174MHz, spike length 128 cm, without cable
Product identification
Product code	PNI-VHF285
Antenna type	5/8 λ
Working tape	VHF (Very High Frequency)
General characteristics
Length	Spike length: 128 cm Total length: 138 cm
Working frequency	134 - 174 MHz
Maximum power applied	200W
Minimum SWR in the center of the band	less than 1.5: 1
Gain	3.4dB
Connector tip	PL
Hole diameter	16 mm
Material	Stainless steel
Weight	180 g
Product color	Silver
The package contains
4m RG58 cable with PC plug, Code T633	Not
PL259 plug	Not
SC 27 butterfly screw, Code T441	Not
Antenna coupling plug LC 27, Code T370	Not
Midland FC 27 mount, Code T478	Not
3 dipoles	Not
Antenna mounting bracket	Not
10 mm metric screw	Not

PNI-VHF285

Lang	Type	Name	Link
EU	User manual	Cutting chart EN, RO, HU	Link
EU10	Declaration of Conformity	Declaration of conformity EU10	Link

PNI-T941

Lang	Type	Name	Link
EU10	User manual	User manual	Link
RO	Declaration of Conformity	Declaratie de conformitate	Link