PNI SafeHome PT710B Smart Video Intercom Package WiFi HD, P2P and USB 2.0 to Micro USB 1m cable

Compatible with Tuya Smart app

The PNI SafeHome PT710B smart video intercom will send notifications to your mobile phone or tablet every time a visitor rings the intercom or you will be notified if someone is at the door by activating the PIR detect alarm function (3 sensitivity levels). The product can be integrated into smart scenarios and automations with other Tuya compatible products.

Superior image quality

Enhanced with an IR-cut filter, the integrated camera delivers superior HD images at 1920 x 1080 (25fps) resolution, H.264/265 compression at a viewing angle of up to 166°.

Thanks to the 6 IR LEDs , you will benefit from a nighttime image of up to 5 meters (minimum illumination: 1 lux) .

Recording on micro SD card. Motion detection function

Directly from the Tuya mobile application you can take images or videos or with the help of the motion detection function, which will be stored on a microSD card of maximum 64GB ( not included ).

Assembly, connectivity, power supply

The installation of the PNI SafeHome PT710B smart video intercom is very simple using the accessories in the package or by using double-sided adhesive tape.

To connect the intercom to the internet, the router must have Wifi standard: 2.4GHz, IEEE 802.11 b/g/n.

Power is supplied by a 3.7V 18650 battery (included) or by an external 14-24V AC power supply (not included).

Plug-in doorbell included

In addition to the call/notification received on your phone when the intercom rings, by pairing the doorbell with the intercom, it will ring in your home.

More doorbells can be added by purchasing the PNI SafeHome PT711S wireless doorbell separately.

The pairing method of the PNI SafeHome PT710B Smart Video Intercom with the Doorbell is done by simultaneously pressing the call button on the Intercom and the volume button on the doorbell for a period of 8 seconds; a ding-ding will be heard confirming the pairing.

USB-microUSB cable

The PNI charging-syncing cable is a perfect charging and syncing accessory for your device with a micro USB plug. The 1 m length of the cable is enough to allow you to use your phone or tablet while it is charging.

LED indicator for charging/data transfer function

The LED on the micro USB connector of the cable turns red when the device is charging. By pressing the button located on the same connector, you can activate the data transfer function. In this situation, the LED turns blue.