|
Distinctive features: VLRA type - zero maintenance, use with placement in any position, long service life, high efficiency (relative to capacity vs. size), low self-discharge rate. 7.2 MW-12S is a lead-acid battery that works without any post-installation maintenance. The gases resulting during the charging process are converted into water inside the sealed box and thus eliminating the need to refill the battery. Thanks to AGM's "Absorbed Glass Mat" technology, the electrolyte is separated into compartments made of fiberglass and thus the battery can be used in any desired position. The battery has been designed for use in equipment with the role of a buffer power supply. If desired, it is of course also possible to use it as a power source for portable devices. The charging voltage at the end is 14.4 - 15 VDC. |
AGM MW 7.2-12 12V/7.2Ah Battery
|
PNI Hunting 400C PRO 24MP Hunting Camera Kit with 7.2Ah Battery and Power Cable
PNI-HU400PRO - PNI Hunting 400C PRO 24MP Hunting Camera with 4G LTE Internet, GPS, simultaneously transmits video and photo to the phone, 4 emails, FTP, full HD 1080P, Night Vision, 59 invisible LEDs for animals
|
|
|
Surprising images reveal the secrets of wildlifeThe built-in motion sensor triggers recording only when the camera detects motion. To avoid false alarms, pay close attention to where the camera is installed. Remove branches or other elements from its field of vision that could cause the camera to trigger by their movement. The PIR angle of 100 degrees, the shutter speed of 0.5 seconds and maximum 5 consecutive photos ensure that all the details and the entire action are captured. The color CMOS sensor, 5MP photos, full HD 1080P video recordings in vivid and bright colors during the day (black and white at night) and multiple shooting mode offer an unforgettable visual experience. Whether you are supervising your home, garden or farm, or you are tracking and monitoring the life and habits of wild animals, the PNI Hunting 400C PRO camera is the most suitable solution. With its small size, camouflage-like housing and LEDs with adjustable brightness (High/Low), the PNI Hunting 400C PRO hunting camera becomes almost impossible to spot. The IP66 class ensures the protection of the room from dust, rain and moisture.
|
|
|
|
|
Send photo (24MP) and video (1080P HD video) to email or phoneWhen detecting motion, the PNI Hunting 400C PRO hunting camera can send photos to 4 phone numbers via MMS and photos or videos to 4 email addresses via SMTP. Photos sent via SMTP and FTP/FTPS have selectable sizes: Small (640x480), Bigger (1920x1440) or Original (5M/8M/12M/24M) depending on the Image Size settings in the camera menu. A novelty is the sending via FTPS, a secure way of transmitting photos that ensures encryption and high data security. |
|
|
|
|
Clear images day and night. "No Glow" infrared technologyThe PNI Hunting 400C PRO hunting camera has all the tools that even an inexperienced user needs: LCD screen for camera programming, IR LEDs for night recording, motion sensor for activating the camera only when animals pass by, wide-angle lenses (100°) and micro SD card slot of up to 32GB for saving recordings (micro SD card is not included). Recommendation: format the micro SD card before use.
|
|
|
|
|
4G GSM ModuleWith the built-in 4G mode, with a 4G SIM card, the PNI Hunting 400C PRO sends the large photos via email and FTP server respectively FTPS and MMS photos (640x480) to the mobile phone. Through the free Trail Camera app (Android / iOS) , the user can make the basic camera settings and get real-time images remotely. - Add your SIM card phone number to the Trail Camera mobile app. - Copy the settings below and change only the phone numbers and email address, with those you own. - Send the settings to the camera by pressing the Send button. - The camera will respond with an SMS "SMS commands executed successfully!" - Give the command from the Get a picture app: and you will receive the same SMS "SMS commands executed successfully!" and an email with the picture taken by the camera. - If it does not work, it means that the product does not have a GSM signal - and the camera must be taken out in the open field. Wait for at least 2 signal dashes to appear. Check the settings in the room at the same time, carefully consulting the product manual.
|
Set up your camera to use a Gmail account
• In your Gmail account, go to the "Security" menu and activate the 2FA option.
• First you will be asked for confirmation by code received via SMS, then pass 2FA on Google Authenticator (optional)
• After activating 2FA, the 'App passwords' option appears

• There we select "Mail" to the app, then to Device "Other" and put a name
• A password will be generated that can be used instead of the password of the email account for authentication from a device such as a camera or printer.

Firmware update April 2025
• You can download from here https://s9.ro/2boi new firmware version that allows you to change the camera ID via SMS command.
• You can download from here https://s9.ro/2bt1 procedure for forming SMS orders that can be sent to the hunting room.
• You can download the Trail Camera app for Android here.
Firmware update procedure:
1) Unzip the firmware upgrade package on the SD card
2) Copy the 2 files from the software upgrade package to the root directory of the camera's SD card. After copying, reinsert the SD card into the camera
3) Turn on the camera and go to the Setup menu, then click the Menu to enter the Menu—>Other—>FW Update—>Software—>yes
4) The screen interface will display "Please wait... ", which means that the software update is in progress. At this time, make sure that the power will not be interrupted and do not turn off the camera during the procedure.
5) After the upgrade is complete, the camera will automatically restart. You can check if the software version is correct from the Menu—>About—>Long press the right arrow button for 10 seconds -> If the code "5MR3POwF334" appears on the screen. The SD card software update is complete;
Common SMS commands after this firmware update version:
1) Enable Camera ID: $01*27#1#3#2#5#1#2#0#1#0#1#0#0#0#0#OFF#OFF#OFF#OFF#1#0#1#MYCAMERA000001#OFF#0#0#0#0#0$0#0#0#0#0$1
2) SD card format: $21*1#1$
3) GPS ON: $10*13#0#0#0#OFF#1#0#1#1#1#0#0#0#0#0$
4) PIR sensor OFF: $01*27#1#3#2#5#1#2#0#1#0#1#0#0#1#0#OFF#OFF#OFF#OFF#1#0#1#OFF#OFF#0#0#0#0#0#0$
5) Restart camera:
$14*1#1$
6) Email Settings: to receive emails
Default parameter:
$08*8#email1#email2#email3#email4#0#0#0#0$
7) Set the server email: to send emails
$07*5#mail.gmail.com#5550#[email protected]#passwordxxx#2$
PNI-ACC712 - AGM MW 7.2-12 12V / 7.2Ah Battery
PNI-CAB-CV - Battery Power Cable for Hunting Rooms, 1.5m Length, 4mm Thick Plug, PNI 400C, PNI 350C, PNI 280, 400C PRO, 550C
|
|
UsageThis cable allows you to power the hunting camera with an external 12V/7Ah battery, thus obtaining a longer autonomy. At one end, the cable is equipped with a special power plug for 4 mm thick PNI hunting cameras (such as PNI Hunting 400C, PNI Hunting 480C, PNI Hunting 350C), and at the other end it is provided with 2 battery connection slippers. The cable is long enough (1.5 meters) to allow the battery to be placed in a safe place, away from the hunting room. |
PNI-HU400PRO - PNI Hunting 400C PRO 24MP hunting camera with 4G LTE Internet, GPS, simultaneously transmits video and photos to the phone, 4 emails, FTP, full HD 1080P, Night Vision, 59 invisible LEDs for animals | |
|---|---|
| Product identification | |
| Product code | PNI-HU400PRO |
| Color | Camouflage |
| Producer | NIP |
| Features | |
| Image sensor | 5MP color CMOS |
| Night vision | up to 20 m |
| LENS | F=3.0; FOV=100° |
| LCD screen | 2 inches |
| IR LED | Top: 27 LEDs/ Bottom: 32 LEDs |
| Image format | JPEG |
| Video format | AVI |
| Video duration | 5-60 sec. programmable |
| Shutter speed | 0.4 sec. |
| Trigger interval | 4 sec. - 7 sec. |
| Operating temperature | -26°C ~ +80°C |
| size | 115 X 74 X 147 mm |
| Weight | 420 grams |
| feeding | 12 AA 9v batteries; DC: 12V |
| Supported battery types | Alkaline or Li-Ion or NiMH batteries |
| Minimum lighting | 0 Lux |
| GPRS | Yes |
| MMS | Yes |
| Waterproof | IP66 |
| Motion sensor | Yes |
| Photo resolution | 24MP (5632x4224) |
| Video resolution | 1080P (1920x1080 px) |
| Send images instantly | Yes, via email, MMS, FTP |
| Microphone | Yes |
| Operating mode | Photo / Photo+Video / Video |
| Day/night sensor | Yes |
| PIR distance | Up to 20 m |
| PIR angle | 100° |
| Burst photos | 1 - 5 |
| Remote configuration | By SMS |
| Dedicated application | TrailCamera |
| Viewing angle | 100° FOV |
| Wiring | |
| USB | Yes |
| Card slot | Yes, SD max 32GB |
| SIM card slot | Yes |
| The package contains | |
| Hunting camera | Yes |
| USB-miniUSB cable | Yes |
| Cord | Yes |
| GPRS antenna | Yes, 2 pcs |
| Strap | Yes |
| SIM adapter | Yes |
PNI-ACC712 - Accumulator AGM MW 7.2-12 12V / 7.2Ah | |
|---|---|
| Battery features | |
| Capacity | 7.2Ah |
| Nominal voltage | 12V |
| Dimensions/Weight | 151 x 65 x 94mm 2.1kg |
| Battery Type | AGM VRLA |
| Operating temperature | -20ºC...+50ºC |
| Other | - Internal resistance (fully charged battery): 35 mΩ - Connectors: Fast-on 187 (T1) - Maximum charging current: 2 A - Maximum discharging current (for 5s): 80 A |
| Equipment included | |
| Battery | 1 BC |
PNI-CAB-CV - Battery power cable for hunting cameras, length 1.5m, plug 4mm thick, PNI 400C, PNI 350C, PNI 280, 400C PRO, 550C | |
|---|---|
| Product identification | |
| Product code | PNI-CAB-CV |
| General features | |
| Dimensions: | Length: 1.5 m Plug thickness: 4mm |






