PNI CT45 Wireless Smart Thermostat, WiFi, Hysteresis ± 0.1°C, Humidity Sensor, Internet Control, for Boilers, TuyaSmart APP

Smart thermostat. Control from Tuya Smart

The PNI CT45 smart thermostat is a device designed to control heating systems via Wi-Fi and RF connection, with the possibility of direct management from your phone via the Tuya Smart application.

Its main goal is to provide thermal comfort, adapted to the user's needs.

The 4-inch LCD screen, with a resolution of 480x800 px, has an intuitive and easy-to-use interface.

Installation and connectivity

PNI CT45 consists of two units: the thermostat and the receiver. The receiver is mounted next to the central unit, and the thermostat can be installed on the wall or placed on a horizontal surface (table, desk, bedside table). The maximum communication distance between the units is 30 m.

The device connects to 2.4 GHz Wi-Fi, and the Tuya app allows for quick setup, either automatically via Bluetooth or manually by adding the thermostat to the list of smart devices.

Main functionalities

The thermostat offers two operating modes: manual and programmed.

In scheduled mode, the user can set different temperatures for Home, Away and Sleep periods, for each day of the week.

Advanced functions include: open window detection (automatic heating shutdown if the temperature drops suddenly), anti-frost function, holiday mode, as well as child protection (key lock).

Modern design and smart features

The PNI CT45 stands out for its combination of modern design, advanced connectivity and smart functions.

The ability to control home heating from anywhere, via the app, provides increased comfort and helps reduce energy bills.

PNI CT45 is not just a simple accessory, but an important step towards a smart home.

Update / Pairing procedure

After installing and adding it to your smartphone, perform the requested update in the application.

- power the relay unit/both units;
- re-energize the relay unit;
- keep both relay unit buttons pressed until the enrollment/antenna LED flashes;
- reset display unit = M + on/off resets the display unit;
- press M, display unit exits stand-by;
- UD enrollment entry, hold down the up arrow + down arrow keys until any radio/Wifi icon stops flashing;