Charging station PNI KW11 16A, 11KW, for electric cars, 85V - 415V, three-phase, 7-pin Type2 cable, 3.5 inch display, with Bluetooth, app control, charging activation via app and RFID card, IP55

EV charging station – 11 kW, three-phase 16A

The station offers a fast charging capability, ideal for residential use. It is compatible with electric vehicles that accept this power.

The device works stably in a wide range of voltages (85V – 415V), being compatible with standard electrical networks in Romania. This versatility ensures consistent performance, even under varying supply voltage conditions.

Type 2 cable with 7-pin connector

Equipped with a standard 7-pin Type 2 connector, the station is compatible with most electric vehicles available on the European market. Logging in is quick and secure with no extra steps.

Bluetooth control and PNI KW22 mobile app

The station allows complete management of charging sessions directly from the KW22 mobile application: start/stop, scheduling, consumption monitoring, notifications. It is a practical solution, especially for multiple users or car fleets.

When installing the PNI KW22 application, activate all the required permissions for proper operation.

Before using the mobile app make sure you have Bluetooth, GPS location and WiFi turned on, and choose the add/icon mode: BLE. Follow the steps on the screen below.

Authentication System: Mobile App + RFID Card

Access to charging can be done either by phone or by RFID card. The user can decide who has access and securely manage the use of the station without the risk of unauthorized use.

Installation details

The station is suitable for users who are looking for a reliable, modern, yet easy-to-manage solution. It is optimally integrated into individual homes with a three-phase network, office spaces or commercial areas, pensions, private parking lots or company headquarters.

The station is installed fixedly, either on the wall or on a dedicated support, depending on the space and needs. For a safe and correct installation, the involvement of an authorized electrician is recommended, given the power of 11 kW. After installation, use is simple and efficient: direct control via app or RFID card.

Three-phase power connector

The power supply of the station to the power source is plug & play with the help of a three-phase power connector 16A 3P+N+PE with a diameter of 43 mm. The length of the power cable is 4+1 meter. Thus, the user benefits from a high level of safety in the use of the station, thanks to the possibility of quick disconnection.