SilverCloud 500VA 300W 2.3A voltage stabilizer
Maximum power | |
The automatic voltage stabilizer SilverCloud K500VA can be used to power electronic devices that consume cumulatively up to 300 W. | |
entry | |
SilverCloud K500VA is powered with a voltage that can vary between 140 and 260 V. | |
output | |
The output of the stabilizer is constant 230V+/-10% provided by 2 schuko sockets located on its rear panel. | |
Exit delay | |
The stabilizer is equipped with an output signal delay circuit which is recommended in the use of refrigeration equipment, to minimize the possibility of compressor motor failure. | |
Double counter | |
The SilverCloud K500VA has a double counter on the front panel to track both the input and output voltage, and 3 indicator LEDs to track the device's status. | |
Protection | |
The stabilizer is equipped with electrical protection circuits for overvoltage (when the input exceeds the value of 255 V), short circuit and overload. | |
Video presentation |
Video presentation |
|
The SilverCloud K500VA automatic voltage stabilizer |
Characteristics | |
Capacity | 300W/500VA |
Current | 2.3A |
Output connectors | 2 x Schuko socket |
Output voltage | 230V ± 10% |
Input frequency | 50/60 Hz |
Nominal input voltage | 140V~260V AC |
Short circuit protection | Yes |
Overload protection | Yes |
Efficiency | 98% |
Storage temperature | -15~45 degrees C |
Working temperature | 0~40 degrees C |
Moisture | 10%RH ~ 95%RH |
size | 160 x 125 x 236 mm |
Weight | 3 kg |
Exit delay | 6 ~ 120 seconds |