SilverCloud 1000VA 600W 4.5A voltage stabilizer
Maximum power | |
The automatic voltage stabilizer SilverCloud K1000VA can be used to power electronic devices that consume cumulatively up to 600 W. | |
entry | |
SilverCloud K1000VA is powered with a voltage that can vary between 140 and 260 V. | |
output | |
The output of the stabilizer is constant 220V+/-10% provided by 2 schuko sockets located on its rear panel. | |
Exit delay | |
The stabilizer is equipped with an output signal delay circuit which is recommended in the use of refrigeration equipment, to minimize the possibility of compressor motor failure. | |
Double counter | |
The SilverCloud K1000VA has a double counter on the front panel to monitor both the input and output voltage, and 3 LED indicators to monitor the device status. | |
Protection | |
The stabilizer is equipped with electrical protection circuits for overvoltage (when the input exceeds the value of 255 V), short circuit and overload. |
Video presentation |
|
Voltage stabilizer SilverCloud 1000VA 600W |
Characteristics | |
Capacity | 600W/1000VA |
Current | 4.5A |
Output connectors | 2 x Schuko socket |
Output voltage | 230V ± 10% |
Input frequency | 50/60 Hz |
Nominal input voltage | 140V~260V AC |
Short circuit protection | Yes |
Overload protection | Yes |
Efficiency | 98% |
Storage temperature | -15~45 degrees C |
Working temperature | 0~40 degrees C |
Moisture | 10%RH ~ 95%RH |
size | 160 x 125 x 235 mm |
Weight | 4.5 kg |
Exit delay | 6 ~ 120 seconds |
Package contents | |
Voltage stabilizer | Yes |
User manual | Yes |
Accessory | Power cable 1.3 meters |