PNI KW22 32A charging station, 22KW, for electric cars, 85V - 415V, three-phase, 7-pin Type 2 cable, 3.5 inch screen, with Bluetooth, app control, app charging activation and RFID card, IP55

EV charging station – 22 kW, three-phase 32A

The station offers fast charging capacity, ideal for residential use. It is compatible with electric vehicles that support this power.

The device operates stably within a wide voltage range (85V - 415V), making it compatible with standard electrical networks in Romania. This versatility ensures consistent performance, even under varying power supply conditions.

Type 2 cable with 7-pin connector

Equipped with a standard 7-pin Type 2 connector, the station is compatible with most electric vehicles available on the European market. Connection is quick and secure, with no additional steps.

Control via Bluetooth and mobile app

The station allows complete management of charging sessions directly from the mobile app: start/stop, scheduling, consumption monitoring, notifications. It is a practical solution, especially for multiple users or car fleets.

Authentication system: mobile app + RFID card

Access to charging can be gained either by phone or RFID card. The user can decide who has access and can safely manage the use of the station without the risk of unauthorized use.

Installation details

The station is suitable for users looking for a reliable, modern, yet easy-to-manage solution. It integrates perfectly into individual homes with a three-phase network, office spaces or commercial areas, guesthouses, private parking lots, or company headquarters.

The station is permanently installed either on the wall or on a dedicated support, depending on the space and requirements. For safe and correct installation, it is recommended to involve a qualified electrician, given the power of 22 kW. After installation, use is simple and efficient: direct control via app or RFID card.

Three-phase power connector

The station is plug-and-play connected to the power source using a 32A 3P+N+PE three-phase power connector with a diameter of 64 mm. The power cable is 1 meter long. This gives the user a high level of safety when using the station, thanks to the quick disconnect feature.